MTN PRO 2K Two-Component Satin Black RAL-9005 is a two-component polyurethane top coat offering exceptional resistance to scratches, fuels, solvents and a wide range of chemicals. It provides excellent durability, weather resistance and protection against humidity, making it suitable for demanding industrial, automotive and decorative applications.
Designed as a high-performance satin black finishing coat, it can be applied over most properly prepared surfaces and compatible paint systems. The durable polyurethane formulation delivers a tough, professional-quality finish with excellent adhesion and long-lasting colour retention.
For professional use only. Contains isocyanates. The use of an approved respirator is mandatory.
Characteristics
- Product composition: 2 component polyurethane.
- Touch dry: 30 minutes
- Totally dry: 72 hours
- Colour range / finish: Satin
- Capacity: 400 ml
- Theoretical yield: 2.5 m2
- Max temperature resistance: 100 °C
- Suitable surfaces: Properly prepared metal, steel, aluminium, stainless steel, wood, fibreglass, ceramics, stone and many hard plastics. Compatible with most fully cured paint systems.
- Time to recoat: 10 minutes
Instructions for use
- Shake the can vigorously before use, for approximately one minute after hearing the sound of the mixer.
- Remove the red button from the lid. Turn the can 180º and place the button on the stem on the bottom side of the aerosol.
- Place the aerosol on a firm ground and press the red button with the palm of your hand.
- After activation, shake the aerosol for 2 minutes to ensure a good mixing of the product and catalyst.
- Apply on clean and dry surfaces. On already painted bilayer system surfaces, check the compatibilities in cases where using paints by other manufacturers.
- Turn the aerosol upside down to clean out the valve after use. If the nozzle becomes blocked replace it with a new one.
- Never apply to equipment that is plugged in and use in well ventilated areas. Do not breathe the aerosol vapours.
*Once the 2 components have been mixed and the chemical reaction has started, the product can be used for the next 8 hours only.