Protect with MTN Pro Pure Zinc 99% Spray Paint > > a fast-drying, zinc-rich coating formulated with thermoplastic acrylic resins and zinc powder. This eco-friendly spray fights corrosion with a tough, elastic matte finish, perfect for metal structures and more. Easy to apply and recoat, it’s lead-free with high covering power. Ideal for machinery, marine, coastal equipment, and industrial use.
Many 99% zinc-rich aerosols on the market are notorious for failing to propel the entire contents — leaving up to 25–30% of the heavy zinc sediment stranded at the bottom, completely unusable. Not with MTN Pro Pure Zinc 99% Spray Paint. Thanks to Montana Colors’ advanced aerosol valve and propellant technology, the formula stays perfectly suspended and dispenses smoothly from the first spray to the very last drop. You get the full 400 ml of high-zinc protection — no waste, no frustration, no half-empty cans sitting on the shelf.
Features:
Very fast drying
Good adhesion
Excellent anticorrosive power
Due to its conductive nature, it is suitable for welding processes.
Resistant up to 350ºC
Applications:
Metal structures, doors, welding joints, vehicles, plastics, DIY
Touch-up for galvanised surfaces
On rusty metallic surfaces, remove rust with a wire brush and prepare an anti-rust primer if considered necessary. Apply an anchor layer on plastics and polyesters.
INSTRUCTIONS FOR USE
- Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
- Apply to clean, dry surfaces. Remove corrosion with a wire brush.
- For best results apply in thin layers. Three thin layers are always better than one thick one, and may be repainted within fifteen minutes with the same paint.
- During application it is recommended to shake the spray can periodically.
- Turn the aerosol upside down to clean out the valve after use. If the nozzle becomes blocked replace it with a new one.
- Never apply to equipment that is plugged in and use in well ventilated areas.